| 1 1295 01 Rollix Slewing Ring Bearings | N1:25.4 mm; P90°:56.5 kN; A1:111.125 mm; Da:180 mm; P180°:38.3 kN; End plug (suffix Y):EPR 10; da:74.612 mm; R2:30.163 mm; H1:114.3 mm; h:47.625 mm; H:222.25 mm; Housing:SAF 617; H2:44.45 mm; Stabilizing ring:2 x SR-1617; Pa:10.5 kN; Appropriate attachment bolt size G:0.875 in; A2:231.775 mm; Ca:69.799 mm; P150°:32 kN; Cap bolt, SAE grade:8; |
| 66174L Franke Slewing Ring Bearings | Basic Radial Load Rating-Static SCO:3650 N; Basic Interchange BCA:-; Width - Inner Ring B1:12.20 mm; D:35.0000 mm; Accessories:87000 Shield & Seal; Width - Overall B:12.7 mm; Basic Interchange FAF:-; Basic Radial Load Rating-Dynamic DC:7610 N; Width - Outer Ring B0:11.0 mm; d:14.000 mm; Speed Rating-Single and Double Sealed Grease SDG:13000 rpm; Basic Interchange NDH:87014; Fillet Radius ra:0.64 mm; |
| 66169L Franke Slewing Ring Bearings | Reference speed:300 r/min; r1,2 min.:7.5 mm; Da min.:920 mm; da max.:778 mm; Basic static load rating C0:29000 kN; B:412 mm; da min.:702 mm; ra max.:6 mm; D:1090 mm; Fatigue load limit Pu:1760 kN; Operating clearance factor k2:0.097; Ca min.:16.7 mm; d:670 mm; Limiting speed:400 r/min; s1 max.:37.2 mm; Da max.:1058 mm; d2 ≈:779 mm; Basic dynamic load rating C:16000 kN; Mass bearing:1570 kg; D1 ≈:967 mm; |
| 75057A Franke Slewing Ring Bearings | Mass bushing:0.01 kg; Coefficient of friction µ max.:0.1; Specific dynamic load factor K:10 N/mm²; Tolerance housing:H7; Coefficient of friction µ min.:0.05; d:14 mm; Permissible sliding velocity v max.:5 m/s; Specific static load factor K0:20 N/mm²; Tolerance shaft:h8; B:10 mm; D:20 mm; Permissible sliding velocity v min.:0.25 m/s; |
| 35 1091 01 Rollix Slewing Ring Bearings | Oil Speed Rating n2:4000 rpm; B:70.00 mm; d:70.000 mm; Fillet Radius ra:2.00 mm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:190000 N; Basic Static Radial Load Rating Co:186000 N; D:150.0000 mm; Grease Speed Rating n1:3000 rpm; |
| 75034A Franke Slewing Ring Bearings | H2:44.45 mm; RG:3/8 NPT; Da:170 mm; P120°:33.8 kN; H1:107.95 mm; End plug (suffix Y):EPR 8; A2:233.363 mm; Taconite seal (dc shaft position):TER 60; J max.:320.675 mm; PG:1/4 NPT; R1:63.5 mm; ba:46.038 mm; P60°:92.5 kN; da:80 mm; Appropriate attachment bolt size G:0.625 in; Pa:23.6 kN; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:515.2 N·m; P150°:30.7 kN; P90°:55.6 kN; |
| 73082L Franke Slewing Ring Bearings | Grease Speed Rating n1:980 rpm; Basic Dynamic Radial Load Rating C:741000 N; Fillet Radius rb:1.50 mm; Basic Static Radial Load Rating Co:1340000 N; Fillet Radius ra:4.00 mm; B:92.00 mm; D:580.0000 mm; Oil Speed Rating n2:1200 rpm; d:320.000 mm; |
| 2 1565 02 Rollix Slewing Ring Bearings | B:27.00 mm; Basic Dynamic Radial Load Rating C:39100 N; d:35.000 mm; Grease Speed Rating n1:6000 rpm; Fillet Radius ra:1.00 mm; D:72.0000 mm; Sealed Speed Rating n3:6000 rpm; Accessories:One Shield & Snap-Ri; Basic Static Radial Load Rating Co:36500 N; Oil Speed Rating n2:8000 rpm; |
| 73028L Franke Slewing Ring Bearings | d:25 mm; Permissible sliding velocity v max.:1 m/s; D1:35 mm; Specific dynamic load factor K:40 N/mm²; Mass bushing:0.0029 kg; Specific static load factor K0:80 N/mm²; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:h9; Coefficient of friction µ min.:0.06; Tolerance housing:H7; Coefficient of friction µ max.:0.15; B:11.5 mm; B1:1.5 mm; D:28 mm; |
| 66150L Franke Slewing Ring Bearings | J min.:269.875 mm; R2:26.988 mm; Ca:67.793 mm; H1:107.95 mm; Appropriate attachment bolt size G:0.75 in; Housing:SAF 616; R1:63.5 mm; P90°:51.6 kN; h:46.038 mm; Cap bolt:2 x 3/4-10 UNC; da:66.675 mm; P180°:34.7 kN; PG:1/8 NPT; Pa:9.43 kN; Da:170 mm; P60°:85.9 kN; N1:22.225 mm; A2:233.363 mm; H:209.55 mm; Max. speed for Taconite seal:1150 r/min; |
| 66199L Franke Slewing Ring Bearings | d:40 mm; F:45 mm; Mass inner ring:0.043 kg; B:17 mm; r, r1,2 min.:0.3 mm; |
| 2 256 Rollix Slewing Ring Bearings | Housing:FSNL 522-619 RU; J:350 mm; H1:125 mm; N1:18 mm; J1:70 mm; H2:45 mm; Pa:220 kN; Oil seal:2 x TSN 619 U; Appropriate attachment bolt, rec. tightening torque:200 N·m; H:242 mm; P90°:410 kN; Q180°:310 kN; Cap bolt, size:M 20x100; P0°:600 kN; N4 max.:8 mm; A2:195 mm; Ca:80 mm; P120°:310 kN; End cover:ASNH 522-619 R; N:24 mm; |
| 75083A Franke Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:176000 N; Accessories:Without Accessories; Basic Static Radial Load Rating Co:176000 N; Oil Speed Rating Open/Shielded n2:3400 rpm; Grease Speed Rating Open/Shielded n1:2800 rpm; Fillet Radius ra:2.50 mm; B:48.00 mm; D:200.0000 mm; d:80.000 mm; |
| 7 1830 04 Rollix Slewing Ring Bearings | Oil Speed Rating n2:6300 rpm; B:40.00 mm; D:90.0000 mm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:61000 N; Fillet Radius rb:0.60 mm; Grease Speed Rating n1:4800 rpm; Basic Dynamic Radial Load Rating C:63700 N; d:50.000 mm; |
| 75020A Franke Slewing Ring Bearings | Ca:67.793 mm; P150°:28.9 kN; Cap bolt:2 x 3/4-10 UNC; P90°:51.6 kN; Stabilizing ring:2 x SR-1616; J min.:269.875 mm; h:46.038 mm; H:209.55 mm; Labyrinth ring (db shaft position):LOR 84; Appropriate attachment bolt size G:0.75 in; Initial grease fill:365.71 g; Pa:21.4 kN; P180°:34.7 kN; dc:76.2 mm; Da:170 mm; da:80 mm; H1:107.95 mm; Housing:SAF 316; H2:44.45 mm; RG:3/8 NPT; |
| 2 105 Rollix Slewing Ring Bearings | G3:13 mm; G2:G 1/8; B5:112 mm; A:8 mm; B1:342 mm; d1:670 mm; d3:830 mm; Hydraulic nut:HMV 142E; B:90 mm; G:Tr 710x7; Mass adapter sleeve assembly:228 kg; d:710 mm; |