| 66152L Franke Slewing Ring Bearings | Oil Speed Rating n2:2600 rpm; Basic Dynamic Radial Load Rating C:199000 N; Fillet Radius rb:1.00 mm; B:42.00 mm; Basic Static Radial Load Rating Co:216000 N; D:250.0000 mm; d:140.000 mm; Grease Speed Rating n1:1800 rpm; Fillet Radius ra:2.50 mm; |
| 73015L Franke Slewing Ring Bearings | d:25.000 mm; D:52.0000 mm; Basic Static Radial Load Rating Co:4400 N; Oil Speed Rating n2:14000 rpm; Grease Speed Rating n1:11000 rpm; Basic Dynamic Radial Load Rating C:16800 N; B:18.00 mm; Fillet Radius ra:1.00 mm; |
| 25 0941 01 Rollix Slewing Ring Bearings | D:160 mm; d1 ≈:112.5 mm; C:4.9 mm; Da max.:149 mm; Mass bearing:2.19 kg; r0 max.:0.6 mm; B:30 mm; Ca max.:7.72 mm; da min.:101 mm; b:3.1 mm; ra max.:2 mm; Limiting speed:5300 r/min; Fatigue load limit Pu:2.8 kN; Reference speed:8500 r/min; Calculation factor kr:0.025; d:90 mm; Basic dynamic load rating C:101 kN; Basic static load rating C0:73.5 kN; r1,2 min.:2 mm; ba min.:3.5 mm; |
| 73045L Franke Slewing Ring Bearings | N1:22.225 mm; P150°:28.9 kN; Cap bolt:2 x 3/4-10 UNC; PG:1/8 NPT; A1:98.425 mm; P90°:51.6 kN; R1:63.5 mm; Ca:67.793 mm; A2:160.338 mm; Stabilizing ring:SR-19-16; J max.:320.675 mm; RG:3/8 NPT; End plug (suffix Y):EPR 8; S:4.763 mm; R2:26.988 mm; H:209.55 mm; H2:44.45 mm; Initial grease fill:181.44 g; P180°:34.7 kN; h:42.862 mm; |
| 66391L Franke Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:88000 N; Accessories:One Shield; Grease Speed Rating Open/Shielded n1:4400 rpm; d:50.000 mm; D:130.0000 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:71000 N; B:31.00 mm; Oil Speed Rating Open/Shielded n2:5400 rpm; |
| 36 0941 01 Rollix Slewing Ring Bearings | Thread grub screw G2:1/4-28 UNF; Fatigue load limit Pu:0.28 kN; Hexagonal key size for grub screw N:3.175 mm; RG:1/4-28 UNF; B:31 mm; L:85.7 mm; Housing:FYWR 504 Y; d:19.05 mm; s1:18.3 mm; Basic dynamic load rating C:10.8 kN; N:11.1 mm; Basic static load rating C0:6.55 kN; A5:25.3 mm; Db2:59.7 mm; Housing material:Stainless steel; Recommended diameter for attachment bolts, inch G:0.375 in; T:32.6 mm; |
| 66172L Franke Slewing Ring Bearings | A1:120.65 mm; ba:50.006 mm; End plug (suffix Y):EPR 13; Ca:62.89 mm; PG:1/4 NPT; Cap bolt recommended tightening torque:298.3 N·m; P60°:178 kN; da:98.425 mm; h:45.244 mm; P90°:107 kN; Pa:17.3 kN; Max. speed for Taconite seal:775 r/min; Mass pillow block:54 kg; R1:67.866 mm; Da:200 mm; Eye bolt:2 x 3/8-16 UNC; A2:231.775 mm; Housing:SSAFS 522; L:419.1 mm; H1:125.425 mm; |
| 73111L Franke Slewing Ring Bearings | B:65.00 mm; Sealed Speed Rating n3:1600 rpm; Oil Speed Rating Open/Shielded n2:2900 rpm; d:105.000 mm; Basic Static Radial Load Rating Co:228000 N; Grease Speed Rating Open/Shielded n1:2400 rpm; D:290.0000 mm; Accessories:One Seal; Basic Dynamic Radial Load Rating C:247000 N; Fillet Radius ra:3.00 mm; |
| 66200L Franke Slewing Ring Bearings | D:72 mm; with tapered bore:1207 ; B1:mm; Oil:9 400 min-1; rs Dynamic (Cr):1.1 mm; Grease:0.230 kN; B:17 mm; with cylindrical bore:11 000 min-1; Pu:5.110 kN; Static (Cor):16.270 kN; d:35 mm; |
| 73047L Franke Slewing Ring Bearings | Grease Speed Rating Open/Shielded n1:1500 rpm; d:280.000 mm; B:46.00 mm; Basic Static Radial Load Rating Co:285000 N; Oil Speed Rating Open/Shielded n2:1800 rpm; Sealed Speed Rating n3:950 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:216000 N; Accessories:One Seal; D:380.0000 mm; |
| 73023L Franke Slewing Ring Bearings | D:200 mm; E:mm; r1s (min):1.1 mm; B:33 mm; b1:mm; b:mm; F:148 mm; d2:130 mm; s:2 mm; d2 (max):mm; Dynamic (Ca):162 kN; Static (Coa):203 kN; Pu:21.300 kN; rs (min):2 mm; |
| 73040L Franke Slewing Ring Bearings | Calculation factor Y0:1.4; Da max.:141 mm; Fatigue load limit Pu:62 kN; d:100 mm; Basic dynamic load rating C:359 kN; Reference speed:2600 r/min; Calculation factor Y2:2.2; ra max.:1.5 mm; da max.:110 mm; 2B:64 mm; T:64 mm; Basic static load rating C0:560 kN; Calculation factor Y1:1.5; Calculation factor e:0.46; r3,4 min.:1.5 mm; Mass bearing pair:3.92 kg; rc max.:0.6 mm; Ca min.:6 mm; D:150 mm; b:10 mm; |
| 66151L Franke Slewing Ring Bearings | Basic dynamic load rating C:1100 kN; r3,4 min.:4 mm; Da max.:302.2 mm; s max.:4.2 mm; d:180 mm; Axial load factor Y:0.4; Reference speed:2200 r/min; Mass bearing:29.9 kg; F:215 mm; Basic static load rating C0:1430 kN; Limiting speed:3600 r/min; da max.:211 mm; da min.:197 mm; D:320 mm; db min.:233 mm; Calculation factor kr:0.3; ra max.:3 mm; Fatigue load limit Pu:146 kN; D1 ≈:280 mm; Limiting value e:0.3; |
| 23 1091 01 Rollix Slewing Ring Bearings | d:75 mm; B:17 mm; r1,2 min.:2 mm; d1:160 mm; Mass shaft washer:0.5 kg; |
| 66166L Franke Slewing Ring Bearings | Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:108000 N; Grease Speed Rating n1:3200 rpm; Accessories:No Shield, no Seal,; B:58.70 mm; Basic Dynamic Radial Load Rating C:138000 N; d:65.000 mm; Oil Speed Rating n2:4300 rpm; D:140.0000 mm; Sealed Speed Rating n3:3200 rpm; |
| 73039L Franke Slewing Ring Bearings | Cap bolt, size:M 12x70; Appropriate attachment bolt, rec. tightening torque:200 N·m; J1:50 mm; Oil level, min.:36 mm; H2:32 mm; N1:18 mm; da:60 mm; Housing:FSNL 516-613 RU; A1:90 mm; L:315 mm; P90°:260 kN; Q120°:220 kN; Ca:58 mm; N4 max.:8 mm; P55°:430 kN; P150°:175 kN; Da:140 mm; Mass housing:9.5 kg; J6:288 mm; Appropriate attachment bolt, size G:16 mm; |