| No. | Brand | s | N | a | D | H | J | L | S |
| NTN CRTD7612 | - | - | - | - | 90 mm | - | - | - | - |
| NTN CRTD8201 | - | - | - | - | 200.0000 mm | - | - | - | - |
| 2THR50381 | - | - | - | - | 52.0000 mm | - | - | - | - |
| NSK 460TFD6801 | - | - | - | 14.651 mm | - | - | - | - | - |
| NTN CRTD3618 | - | 31.75 mm | - | 6.35 mm | - | - | 152.4 mm | 193.675 mm | 0.794 mm |
| SKF BFDB353200/HA3 | - | - | - | - | - | - | - | - | - |
| NTN CRTD9408 | - | - | - | 24.8 mm | 125 mm | - | - | - | - |
| 2THR55 | - | - | - | - | - | - | - | - | - |
| NSK130TFD2801 | - | - | - | - | 190.0000 mm | - | - | - | - |
| FAG 534038 | - | 36.513 mm | - | - | - | 192.088 mm | - | 330.2 mm | 0.794 mm |
| NSK 180TFD4001 | - | - | - | 13 mm | 55 mm | - | - | - | - |
| 829232 | - | - | - | - | - | - | - | - | - |
| 2THR94722 | - | - | - | - | 600 mm | - | - | - | - |
| SKF 350916D | - | - | - | - | 140.0000 mm | - | - | - | - |
| FAG 5634 | - | - | - | 8.308 mm | - | - | - | - | - |
| SKF 353002 | - | - | - | - | 78 mm | 16 mm | - | - | - |
| 829764 | - | - | - | - | - | - | - | - | - |
| 548285 | - | - | - | - | - | - | - | - | - |
| NSK 220TFD3001 | - | - | - | - | 80 mm | - | - | - | - |
| NSK 440TFD6601 | - | - | - | - | - | - | - | 628.65 mm | - |
| 550760Y | - | - | - | - | 100.0000 mm | - | - | - | - |
| FAG 524902 | - | - | - | 10 mm | 230 mm | - | - | - | - |
| FAG 532584 | - | - | - | - | 125.0000 mm | - | - | - | - |
| 82999 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | P90°:334 kN; Appropriate attachment bolt size G:1.25 in; PG:1/4 NPT; da:184.15 mm; S:4.763 mm; Da:359.999 mm; J1:127 mm; Pa:58.7 kN; A2:358.775 mm; J max.:635 mm; P180°:222 kN; P60°:557 kN; H2:85.725 mm; Housing:SAFS 540; Stabilizing ring:SR-40-34; End plug (suffix Y):EPR 21; J min.:571.5 mm; H:419.1 mm; Max. speed for Taconite seal:425 r/min; Ca:107.798 mm; |
| 82997 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Tolerance housing:H7; B:11.5 mm; Permissible sliding velocity v max.:1 m/s; D1:35 mm; Coefficient of friction µ max.:0.15; Tolerance shaft:h9; Coefficient of friction µ min.:0.06; B1:1.5 mm; D:28 mm; Mass bushing:0.0029 kg; d:25 mm; Specific dynamic load factor K:40 N/mm²; Specific static load factor K0:80 N/mm²; Permissible sliding velocity v min.:0 m/s; |
| FAG 513125 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | P150°:151 kN; P120°:169 kN; Ca:147.803 mm; P60°:449 kN; da:266.7 mm; Mass pillow block:298 kg; P90°:271 kN; PG:1/4 NPT; Cap bolt, SAE grade:5; Housing:SAF 056 KAUA; Appropriate attachment bolt size G:1.5 in; Initial grease fill:3515.4 g; R1:163.512 mm; A1:228.6 mm; Da:419.999 mm; J max.:749.3 mm; A2:315.119 mm; End plug (suffix Y):X-5217-2; H:495.3 mm; Cap bolt recommended tightening torque:1017 N·m; |
| 540295 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D:280 mm; b:17 mm; Calculation factor Y0:1.8; T:127.5 mm; Limiting speed:2400 r/min; Reference speed:1400 r/min; K:10 mm; Calculation factor e:0.35; Ca min.:8 mm; Da min.:239 mm; Basic static load rating C0:1600 kN; Fatigue load limit Pu:163 kN; 2B:116 mm; Basic dynamic load rating C:1165 kN; Da max.:264 mm; d:130 mm; r3,4 min.:4 mm; r5 min.:1.5 mm; Calculation factor Y1:1.9; rc max.:1.5 mm; |
| FAG 509391 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | A2:187.325 mm; J max.:368.3 mm; Max. speed for PosiTrac Plus seal:1350 r/min; PosiTrac Plus contact element:2 x B10724-113; P90°:111 kN; Mass pillow block:49.9 kg; Cap bolt:2 x 1-8 UNC; Labyrinth ring:2 x LOR 114; Cap bolt, SAE grade:5; N1:22.225 mm; P180°:81.4 kN; P60°:185 kN; ba:61.913 mm; R1:77.787 mm; RG:1/2 NPT; Pa:27.4 kN; Appropriate attachment bolt size G:0.75 in; h:46.831 mm; Initial grease fill:379.89 g; |
| NSK 260TFD3602 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Category:Plain Bearings; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:0; Product Group:B04264; |
| SKF 353006 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Accessories:Without Accessories; D:72.0000 mm; B:19.00 mm; Basic Static Radial Load Rating Co:20800 N; Fillet Radius ra:1.00 mm; d:30.000 mm; Oil Speed Rating Open/Shielded n2:9500 rpm; Basic Dynamic Radial Load Rating C:29200 N; Grease Speed Rating Open/Shielded n1:7800 rpm; |
| NSK 670TFD9001 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Appropriate attachment bolt size G:0.875 in; Stabilizing ring:2 x 38151-32; A2:277.813 mm; End plug (suffix Y):EPR 16; A1:133.35 mm; H2:60.325 mm; da:138.113 mm; R2:36.513 mm; P180°:84.5 kN; J max.:406.4 mm; PG:1/4 NPT; P60°:189 kN; ba:59.531 mm; P150°:68.1 kN; Initial grease fill:382.73 g; Cap bolt, SAE grade:8; h:51.594 mm; Da:240 mm; H:287.337 mm; Taconite seal:TER 130; |
| FAG 524134 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:50.000 mm; Grease Speed Rating Open/Shielded n1:5200 rpm; Oil Speed Rating Open/Shielded n2:6300 rpm; B:31.00 mm; Fillet Radius ra:2.00 mm; D:130.0000 mm; Accessories:Two Seals & Snap-Rin; Sealed Speed Rating n3:3700 rpm; Basic Static Radial Load Rating Co:52000 N; Basic Dynamic Radial Load Rating C:87100 N; |
| SKF 353102 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | RG:1 NPT; S:4.763 mm; A1:228.6 mm; db:222.25 mm; Cap bolt recommended tightening torque:4284.4 N·m; L:869.95 mm; Stabilizing ring:SR-0-40; Eye bolt:2 x 1/2-13 UNC; ba:103.188 mm; End plug (suffix Y):EPR 22; Housing:SSAFS 340; Labyrinth ring (dc shaft position):LOR 164; PG:1/4 NPT; P60°:669 kN; Cap bolt:4 x 1 1/2-6 UNC; P120°:249 kN; Bearing limiting speed:1500 r/min; R2:50.8 mm; R1:163.512 mm; |
| 520280Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | da min.:54.6 mm; D2:72.9 mm; r3,4 min.:0.6 mm; a:16.8 mm; Preload class C GC:500 N; Ball diameter Dw:7.938 mm; Static axial stiffness, preload class B:72 N/µm; Mass bearing:0.23 kg; rb max.:0.6 mm; da max.:59.7 mm; Calculation factor f0:8.2; Db max.:75.8 mm; r1,2 min.:1 mm; ra max.:1 mm; Basic dynamic load rating C:15.6 kN; d:50 mm; db max.:57.3 mm; Calculation factor f2B:1.03; Preload class A GA:85 N; |
| SKF 353151 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:470 mm; Bearing designation:PLC 512-46 ; Dynamic (Cr):3712.8 kN; Pu:551.730 kg; B1:167 mm; B:270 mm; D:720 mm; Weight:375 ; Static (Cor):7725 ; |
| FAG 515196 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | RG:3/4 NPT; Da:309.999 mm; Pa:73.4 kN; H1:179.4 mm; PG:1/4 NPT; H2:69.85 mm; ba:74.612 mm; da:170 mm; N1:28.575 mm; Labyrinth ring (dc shaft position):LOR 148; P150°:113 kN; L:628.65 mm; J max.:549.275 mm; A1:171.45 mm; H:360.363 mm; PosiTrac Plus contact element (db shaft position):B10724-161; Appropriate attachment bolt size G:1 in; Cap bolt, SAE grade:8; A2:247.65 mm; End plug (suffix Y):EPR 19; |
| NSK 350TFD5401 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | J min.:530.225 mm; Cap bolt:4 x 3/4-10 UNC; PG:1/4 NPT; P150°:75.6 kN; RG:3/4 NPT; h:60.325 mm; H:377.825 mm; S:4.763 mm; End plug (suffix Y):EPR 19; R1:114.3 mm; H1:190.5 mm; Mass pillow block:144 kg; Adapter sleeve assembly:SNW 136x6.3/8; L:679.45 mm; Ca:121.818 mm; R2:41.275 mm; Taconite seal:TER 147; Pa:60.5 kN; da:161.925 mm; Initial grease fill:1304.1 g; |
| 5634 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | B1:46.609 mm; Hydraulic nut:HMVC 11E; B:12.954 mm; B4:14.3 mm; d3 max.:75.54 mm; Sleeve:S 11x1.13/16; d:55 mm; d1:46.038 mm; Mass adapter sleeve assembly:0.36 kg; Threads per inch:18; G:54.788 mm; |
| 829234 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | B1:249.885 mm; Sleeve:S 30/500x18.1/2; G:499.008 mm; Hydraulic nut:HMVC 100E; Mass adapter sleeve assembly:91 kg; d1:469.9 mm; B:68.656 mm; Threads per inch:5; d:500 mm; d3 max.:579.577 mm; B5:82.55 mm; |
515196 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS Video
5R110W TorqShift Transmission Filter | Raybestos Powertrain
515196 replaces OE part 8C3Z-7A098-D and meets or exceeds OEM requirements and provides consistent, reliable protection as a Transmission Filter for every ...
SunCoast 515196 Transmission Filter | 2008-2010 Ford 6.4L ...
SunCoast 515196 Transmission Filter | 08-10 Ford 6.4L Powerstroke. Thoroughbred Sku #: SUN515196 Manufacturer Sku #: 515196 ...
#515196 hex color
#515196 Color Information ... In a RGB color space, hex #515196 is composed of 31.8% red, 31.8% green and 58.8% blue. Whereas in a CMYK color space, it is ...
Bob-Cat Part Number 515196 TINE 1/2 CORING - Russo ...
Bob-Cat Part Number 515196 TINE 1/2 CORING ... WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects and ...
SunCoast Diesel 515196 5R110 Transmission Filter For Ford ...
Buy SunCoast Diesel 515196 5R110 Transmission Filter For Ford 2008-UP 6.4L Power Stroke: Transmission Filters - Amazon.com ✓ FREE DELIVERY possible on ...Package Dimensions: 10 x 10 x 6 inchesItem Weight: 3 pounds
Schiller Genuine Part 515196 TINE CORING .5 - SLE Equipment
Schiller Genuine Part 515196 TINE CORING .5 ; Details. 515196 - SLE Equipment is a full line Distributor and carries 99% of all lines in the outdoor power ...
#515196 Hex Color Code, RGB and Paints - Encycolorpedia
The hexadecimal color code #515196 is a shade of blue-magenta. In the RGB color model #515196 is comprised of 31.76% red, 31.76% green and 58.82% blue. In the ...
Bunton, Bobcat, Ryan 515196 TINE CORING .5 - Jacks Small ...
Bunton, Bobcat, Ryan TINE CORING .5 515196. We have the Bunton, Bobcat, Ryan TINE CORING .5 you need with fast shipping and low prices.
Steiner Turf: TINE 1/2 CORING, Part # 515196 - Messicks
Steiner Turf: TINE 1/2 CORING, Part # 515196 Buy Online & Save. TINE 1/2 CORING.